Timber Framed Sliding Dovetails

Timber Framed Sliding Dovetails
IMG_5568.JPG

After the Dutch tool chest class at Lost Art Press, I really wanted to finish up my Roubo workbench.  It was amazing to actually work at not just one proper Roubo, with proper holdfasts, leg vises and the like. 

I already had the top laminated up, and last weekend I flattened it by hand, with a scrub plane, a #4 Stanley and a #5 low angle plane. 

This weekend, it was time for the legs.

IMAGE.JPG
IMAGE.JPG
IMAGE.JPG
IMAGE.JPG
IMAGE.JPG

I realized on my practice piece that I did not have a saw deep enough for these joints, so I used my band saw. I would have loved to have used a big ole bad axe Roubo Beastmaster, but I didn’t want to wait, and I also wanted the accuracy on my first go. i mostly wanted to do it this weekend. 

It worked ok! I got it done but there will still be a lot more cleanup than I was expecting. This little benchtop band saw doesn’t have a lot of power against this end grain, and I need to learn to set it up better

 

IMAGE.JPG

Once I made all the bandsaw cuts, I took it back outside to cut the tenon cheeks with a crosscut saw. Not just because the sun was out, but even just on two saw benches the weight of this bench really makes it so much better to work on. It just doesn’t move.

 

IMAGE.JPG

Chiseled the ends out.  I was able to take vertical strike along the base line and split the grain on the way down. I may try this on my regular dovetail, since I’m still having trouble coping out the waste perfectly. Chiseling is amazingly intuitive to me. 

 

 

IMAGE.JPG

Repeat three more times, and good to go!

This feels a lot more like timber framing, which is kind of awesome. A friend who works the trail crew in the Sierras visited a while ago, and my “tiny little tools” were cool and unique to him. It’s fun to work with such massive size in softwood. And after Megan Fitzpatrick’s class, I’m a hundred times more confidant to make journey, especially dovetails.

artist, printmaker from chicago